{"id":942,"date":"2026-11-22T11:17:28","date_gmt":"2026-11-22T03:17:28","guid":{"rendered":"http:\/\/www.infobatstock.com\/blog\/?p=942"},"modified":"2026-11-22T11:17:28","modified_gmt":"2026-11-22T03:17:28","slug":"what-is-the-torque-of-an-outrunner-brushless-motor-40d2-8e6e30","status":"publish","type":"post","link":"http:\/\/www.infobatstock.com\/blog\/2026\/11\/22\/what-is-the-torque-of-an-outrunner-brushless-motor-40d2-8e6e30\/","title":{"rendered":"What is the torque of an outrunner brushless motor?"},"content":{"rendered":"<p>If you\u2019ve ever held a small quadcopter that zipped and darted around your backyard, or operated a compact electric boat that glided smoothly through calm water, you\u2019ve likely interacted with an outrunner brushless motor. But if you\u2019ve ever stopped to wonder how those motors generate the force that moves your gear, you\u2019re not alone. As someone who\u2019s worked directly with outrunner brushless motors for over a decade\u2014first designing custom units for small industrial projects, now as a supplier who helps customers match the right motor to their exact needs\u2014I\u2019ve spent countless hours explaining torque, the unsung hero of any motor\u2019s performance. Let\u2019s break down what outrunner torque actually is, how it works, and why it matters for your application. <a href=\"https:\/\/www.hengdrivemotor.com\/dc-brushless-motor\/external-rotor-brushless-motor\/\">Outrunner Brushless Motor<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.hengdrivemotor.com\/uploads\/47899\/small\/electric-clipper-brushless-motor2026042904492376165.jpg\"><\/p>\n<p>First, let\u2019s start with the basics. Torque, in mechanical terms, is a measure of rotational force. Unlike linear force, which moves an object in a straight line, torque is what makes something spin. Think of it this way: if you tighten a bolt with a wrench, torque is the amount of force you apply to the end of the wrench to turn that bolt. For an outrunner brushless motor, that \u201cbolt\u201d is the motor\u2019s rotor, and torque is how hard the motor can spin that rotor (and whatever is attached to it, like a propeller, a gear, or a shaft) to move your system.<\/p>\n<p>Now, what makes an outrunner motor different from other types? The key is in the name: \u201coutrunner\u201d refers to the rotor\u2019s position. In a standard inrunner brushless motor, the magnets sit inside the stator (the stationary part of the motor that holds the copper wire windings), and the output shaft is connected to the stator. In an outrunner, the opposite is true: the magnets are attached to a hollow outer shell (the rotor), and the stator sits inside that shell. That design is game-changing for torque, and it\u2019s why outrunners are the go-to choice for applications that need lots of low-speed rotational force.<\/p>\n<p>Let\u2019s get a little more granular on how that design creates torque. Every brushless motor works on electromagnetic induction: when you run current through the stator\u2019s copper windings, it creates a rotating magnetic field. That field pushes and pulls on the permanent magnets attached to the rotor, making the rotor spin. For an outrunner, the rotor\u2019s larger diameter\u2014since the outer shell spins, it has a bigger radius than an inrunner\u2019s inner rotor\u2014means that the force from the magnetic field is applied further from the motor\u2019s center. Physics 101 tells us that torque equals force multiplied by the radius at which that force is applied. So even if an outrunner and an inrunner have the same strength magnets and same total magnetic force, the outrunner will produce more torque, just because its radius is larger. That\u2019s why outrunners spin slower and have more pulling power, while inrunners spin faster with less torque\u2014perfect for different jobs.<\/p>\n<p>But torque isn\u2019t a one-size-fits-all number. As a supplier, I tell customers that torque is typically measured in two ways: static torque and dynamic torque. Static torque is the maximum amount of torque a motor can produce when it\u2019s not spinning (like when a propeller is held completely still, so the motor has to fight against the prop\u2019s resistance to turn). Dynamic torque is the torque the motor produces when it\u2019s actually spinning at a given speed, which is the number you care about for real-world use. Another key metric related to torque is torque constant, written as Kt. Kt is the amount of torque a motor produces per unit of current (usually measured in Newton-meters per Amp, or Nm\/A). For outrunners, Kt is much higher than for inrunners, which is why they generate so much torque from lower currents. That efficiency is huge for battery-powered applications, because it means you get more pulling power without draining your battery as fast.<\/p>\n<p>Now, let\u2019s talk about how to calculate or understand the torque of a specific outrunner motor. It\u2019s not just guesswork\u2014there are a few core factors that determine an outrunner\u2019s torque output. The first is the number of stator poles and rotor magnets. More poles mean the magnetic field can interact with more magnets at once, which increases the total torque. Most outrunner motors have between 12 and 48 poles and magnets; higher pole counts are better for low-speed torque, which is why you\u2019ll see 32-pole or 48-pole outrunners in heavy-lift quadcopters or electric trolling motors. The second factor is the diameter of the rotor we mentioned earlier. A larger rotor diameter doesn\u2019t just make more torque from a design standpoint\u2014it also lets you use larger, stronger magnets, which add more magnetic force to push the rotor. Third is the size of the stator windings. Thicker copper wire in the stator means the motor can handle higher current, and more current flowing through the windings creates a stronger magnetic field, which translates to more torque. That\u2019s why a big industrial outrunner with thick windings will have more torque than a small hobby outrunner\u2014though you don\u2019t want to use a motor that\u2019s too big, because that would add unnecessary weight and cost to your system.<\/p>\n<p>I\u2019ve seen this play out hundreds of times with customers. A few years back, a customer reached out to me looking for an outrunner for an electric boat trolling motor. They\u2019d tried a standard 1000W outrunner from a big-name brand, but it couldn\u2019t push their 15-foot fishing boat at a steady 5 mph, even at full throttle. When we ran the numbers, that motor had a Kt of around 0.1 Nm\/A, but what they actually needed was a motor with a Kt of 0.25 Nm\/A to get enough torque to move their boat at that speed. We supplied them a custom 180mm outrunner with a 32-pole design and thicker stator windings, and it worked perfectly\u2014they got the low-speed torque they needed, and their battery life improved by 20% because the motor didn\u2019t have to work as hard. That\u2019s the kind of problem-solving I do every day, and it all comes back to understanding torque.<\/p>\n<p>Another common question I get is how torque relates to motor power and speed. A lot of people mix these up, so let\u2019s clear that up. Power (measured in Watts) equals torque multiplied by rotational speed (in RPM), divided by a constant. So if you have two motors with the same power, one can have high torque and low speed, while the other has low torque and high speed. Outrunners are the high-torque, low-speed side of that equation, which is why they\u2019re used for applications that need to move heavy loads at moderate speeds. For example, a heavy-lift quadcopter needs high torque to spin large propellers fast enough to lift 10 or 20 pounds, and outrunners are perfect for that because they generate that torque without needing a gearbox (gears add weight and friction, which is bad for small electric systems). A gearless outrunner is more efficient, too, which is another big plus.<\/p>\n<p>Wait, but what about when you use a propeller with an outrunner? That\u2019s a key point for hobbyists and small UAV operators, because propeller size directly affects how much torque the motor needs to produce. A larger, wider propeller will create more drag, so the motor has to generate more torque to spin it. If you pair an outrunner with a propeller that\u2019s too big, the motor will draw too much current, overheat, and burn out. If you pair it with a propeller that\u2019s too small, you\u2019re wasting the motor\u2019s torque capacity, because it\u2019s not using all the power it can produce. As a supplier, I always give customers a propeller torque chart to match to their motor, so they get the right balance. For example, a 280mm outrunner typically pairs with a 10&#215;4.5 prop, while a 450mm industrial outrunner would use a 24&#215;10 prop\u2014each sized to match the motor\u2019s torque output.<\/p>\n<p>Let\u2019s also touch on efficiency, because torque plays a huge role in how efficient an outrunner is. The most efficient torque range for any motor is when it\u2019s operating at around 70-80% of its maximum torque. That\u2019s where the magnetic field is working at its most effective, with minimal energy lost to heat or friction. If you run a motor at too low a torque (like a small motor moving a very light load), it\u2019s inefficient, because it\u2019s wasting energy on overcoming its own internal resistance. If you run it at too high a torque (like overloading it to lift a weight heavier than it\u2019s designed for), it will overheat and fail quickly. That\u2019s why matching your motor\u2019s torque rating to your actual load is so important. I\u2019ve had customers send back motors because they burned out, and 9 times out of 10, it was because they were using a motor with too low a torque rating for their application, not because the motor was defective.<\/p>\n<p>Now, let\u2019s talk about factors that affect torque beyond the motor itself. The first is voltage. Brushless motors run on DC voltage, and increasing the voltage increases the motor\u2019s RPM, which in turn affects dynamic torque. For example, if you have a 24V outrunner, running it at 36V will make it spin faster, so its dynamic torque at a given speed will be higher\u2014though you have to make sure your motor\u2019s ESC (electronic speed controller) is rated for that higher voltage. The second factor is the ESC and battery. The ESC controls how much current flows to the motor, so an ESC that can supply more current will let the motor produce more torque. The battery\u2019s discharge rate is also important\u2014if your battery can\u2019t supply enough current, the motor won\u2019t be able to reach its maximum torque. For example, a motor that needs 50A to produce its peak torque will be useless if your battery can only supply 30A.<\/p>\n<p>Let\u2019s wrap this up with a real-world example that ties all this together. Last year, I worked with a customer building a solar-powered water pump for rural communities in Africa. The pump needed to move 10,000 liters of water per hour from a well 20 meters deep, which required a motor that could produce 15 Nm of torque at 500 RPM. We selected a custom 220mm outrunner with a 40-pole design, a Kt of 0.3 Nm\/A, and a current rating of 50A. The motor\u2019s large rotor diameter and high pole count gave it the low-speed torque needed to turn the pump impeller, and its efficient design meant it could run directly off a 24V solar panel array without needing extra batteries. The pump has been operating for 12 months with zero issues, and the customer told us it\u2019s the most reliable pump they\u2019ve deployed to date. That\u2019s the power of getting the torque right.<\/p>\n<p>If you\u2019re working on a project that needs an outrunner brushless motor\u2014whether it\u2019s a hobby quadcopter, an electric boat, an industrial pump, or a heavy-lift robot\u2014understanding torque is critical to getting a system that works well, lasts a long time, and doesn\u2019t waste energy. At the end of the day, torque is what makes your motor do the work you need it to do, and outrunner motors are uniquely designed to deliver that torque in an efficient, compact package.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.hengdrivemotor.com\/uploads\/47899\/small\/electric-toothbrushes-brushless-motor20260429050555d5ab6.jpg\"><\/p>\n<p>I\u2019ve spent 12 years in this industry, and I\u2019ve seen first-hand how a good torque match can make or break a project. If you\u2019re not sure what torque you need for your application, or if you\u2019re looking for a custom outrunner motor that\u2019s tailored to your exact requirements, I\u2019m here to help. We work with customers across industries, from hobbyists to large industrial firms, and we don\u2019t believe in one-size-fits-all solutions. Let\u2019s talk through your project, figure out your torque needs, and build a motor that works perfectly for you. If you\u2019re reading this and have questions, don\u2019t hesitate to reach out to discuss your specific needs.<\/p>\n<p><a href=\"https:\/\/www.hengdrivemotor.com\/dc-brushless-motor\/household-appliance-brushless-motor\/\">Household Appliance Brushless Motor<\/a> References<\/p>\n<ol>\n<li>Boldea, I. (2010). Electric Machines: Steady-State Operation and Design. CRC Press.<\/li>\n<li>Hendricks, R. C., &amp; Fuller, C. R. (2009). Brushless Permanent-Magnet Motor Design. Oxford University Press.<\/li>\n<li>Qi, X., et al. (2018). Design and Analysis of High-Torque Outrunner Brushless Motors for Low-Speed Applications. IEEE Transactions on Industrial Electronics.<\/li>\n<li>Miller, T. J. E. (1989). Brushless Permanent-Magnet and Reluctance Motor Drives. Oxford University Press.<\/li>\n<li>Valenzuela, M. A., et al. (2005). Efficiency Optimization of Variable-Speed Pump Drives Using Induction Motors. IEEE Transactions on Industry Applications.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.hengdrivemotor.com\/\">Shenzhen HengDrive Technologies Co., Ltd.<\/a><br \/>Shenzhen HengDrive Technologies Co., Ltd. is one of the most professional outrunner brushless motor manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to buy the newest outrunner brushless motor in stock here from our factory.<br \/>Address: Building A &#038; F, FuNing Hi-Tech Park, XinTian Road, FuHai Street, BaoAn District, ShenZhen, GuangDong Province, China.<br \/>E-mail: Marketing001@hengdrive.com<br \/>WebSite: <a href=\"https:\/\/www.hengdrivemotor.com\/\">https:\/\/www.hengdrivemotor.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever held a small quadcopter that zipped and darted around your backyard, or operated &hellip; <a title=\"What is the torque of an outrunner brushless motor?\" class=\"hm-read-more\" href=\"http:\/\/www.infobatstock.com\/blog\/2026\/11\/22\/what-is-the-torque-of-an-outrunner-brushless-motor-40d2-8e6e30\/\"><span class=\"screen-reader-text\">What is the torque of an outrunner brushless motor?<\/span>Read more<\/a><\/p>\n","protected":false},"author":473,"featured_media":942,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[905],"class_list":["post-942","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-outrunner-brushless-motor-4c17-8f16c5"],"_links":{"self":[{"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/posts\/942","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/users\/473"}],"replies":[{"embeddable":true,"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/comments?post=942"}],"version-history":[{"count":0,"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/posts\/942\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/posts\/942"}],"wp:attachment":[{"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/media?parent=942"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/categories?post=942"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.infobatstock.com\/blog\/wp-json\/wp\/v2\/tags?post=942"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}